IoT telemetry for industrial water
How much water each process uses, without waiting for month end.
Remote metering on the meters your plant already has installed. The data arrives on its own, per point and per period.
- On your current meter, if it outputs a signal
- No civil works, no new wiring
- No reliance on cellular coverage
Interoperable with open industry standards
- NB-IoT
What you do not measure, you pay for anyway
Four things that happen when water consumption is known once a month.
The total arrives when nothing can be fixed
The bill says how much water was used, but not where or when. By the time it arrives, the month is over.
A loss runs until somebody sees it
Without continuous reading, a leak on one line can run for weeks. The only indicator is an invoice that has not arrived yet.
There is no history to compare against
Without a record per measuring point, there is no way to tell whether a process change raised or lowered consumption. It gets argued from memory.
Every reading depends on someone walking to the meter
And if the meter is far away or in a restricted area, the reading is taken when possible, not when needed.
How the data gets there
From the field sensor to billing-ready data, with your committee's tariff already applied.
Field sensors
LoRaWAN / MQTT gateways
Secure Ziktel cloud
Ops dashboard and member web portal
Compatible with off-the-shelf hardware. No lock-in, no proprietary adapters.
What it prevents
The water you lose without it showing up in any report
Four things that today surface when the bill arrives, and start announcing themselves instead.
Today the loss shows up on next month's invoice.
A leak stops running for a whole month
The equipment reports dripping, burst pipes and reverse flow on its own. And the platform catches what no meter sees by itself: consumption that never stops. A line with uninterrupted flow is almost always a loss.
Today an abnormal flow runs for days unnoticed.
Excess consumption is flagged as soon as it appears
The alert arrives when the reading does, without waiting for the period to close. And because every point reports separately, you know WHICH point spiked, not just that the total went up.
Today closing a measuring point means sending someone.
Shut-off is ordered from the platform
The valve opens and closes remotely: the command is sent and the equipment executes it on its next connection. Useful where access is restricted or the point is far away.
Today a meter that goes quiet spends weeks unnoticed.
A silent point stops being a hole in the balance
Equipment missing its reports leaves a gap in the period's consumption. The platform flags it as soon as it starts missing, not when somebody reconciles the numbers.
Before you decide
What about the meters I already have?
It is the first question at every assembly. There are three answers, and they hinge on one thing: what the equipment already on the line can do.
What is your meter like today?
It gets replaced
There is no way around it: a mechanical dial has nothing to transmit. The new one needs no straight pipe runs before or after and installs in any position, so what changes is the meter, not the plumbing.
We tell you before, not during the site visit.
Does this fit your committee? We will show it running in 30 minutes.
Capabilities
What stops being done by hand
Four capabilities your team will use every day.
- 01
Consumption per point, not one closing total
Each meter reports on its own. Consumption is seen per measuring point and per period, not as a single month-end figure.
- 02
Alerts by rule, not by manual review
Thresholds, patterns and quiet windows. The team finds out when something falls outside the norm, not when the bill arrives.
- 03
History and exportable reports
Trends, period-over-period comparisons and export for whoever has to review it later.
- 04
Map with live status
Every meter and every gateway geolocated, with status visible live.
Does this fit your committee? We will show it running in 30 minutes.
Your data never mixes with anyone else's
Each committee operates in its own space. No one else sees your readings, your members or their consumption.
Sessions that expire and renew
Sessions expire and renew on their own under the policy you define. A leaked credential does not work forever.
Every organisation in its own space
Every committee or company works in a space separate from the rest. There is no way for one organisation's data to show up in another's.
Every antenna delivers only its own
Every receiving antenna — the gateway mounted on the tank or the tower — can only deliver the data that belongs to it. A compromised device cannot reach another committee's information.
Automated backups
Scheduled backups of database and time-series data, with configurable retention.
Deploy it where you want
Two operating models, the same platform.
Cloud managed (SaaS)
We run the infrastructure. You use the platform.
Ideal for committees and operations that want to focus on the business, not the infrastructure.
On-premise (your own infrastructure)
Run the platform on your own hardware, with deployment assisted by our team.
Ideal for operations with strict regulatory requirements or their own infrastructure.
Start with one measuring point
We walk you through the platform in a 30-minute demo, no strings attached.